Keywords: teeth for bucket, bucket teeth for mini excavator, excavator teeth replacement
To maximize the performance of your earthmoving equipment, follow this guide’s instructions on changing excavator buckets and replacing the teeth in the bucket.
Excavators and mini excavators are versatile equipment, suiting projects across multiple industries, from construction and mining to maintenance and materials handling. Depending on the type of work, the bucket and tooth styles you select will be crucial to the project’s efficiency. The right bucket and bucket tooth type can speed up a project, cut down on downtime, boost production, and save costs.
How to Change Excavator Buckets
Excavator buckets deteriorate with time, just like any other well-used parts. You run the risk of harming and exposing the shank of your excavator if you don’t replace a worn-out bucket. You must perform preventive maintenance on your excavator, such as replacing worn-out buckets with new ones, to extend its lifespan.
The type of bucket you select will affect how efficiently the job is completed. On the job, you may need to change buckets rapidly because different types of buckets are better suited for different activities. Productivity will increase and your equipment will remain in outstanding shape if you know how to change your excavator bucket quickly.
Follow these steps to change your excavator bucket:
- Level your buckets: Place your old and new buckets side-by-side on a level surface.
- Remove the bucket’s lynchpins: Use a screwdriver to remove the lynchpins from your current excavator bucket.
- Detach the bucket: Lift the boom arm up and away from the excavator bucket until it is no longer attached.
- Align the new bucket: Reduce your excavator’s throttle speed to its lowest setting. Maneuver your boom arm to align the excavator’s dipper links above the new bucket’s ears.
- Lower the boom arm: Lower the boom arm and maneuver the dipper to line up with the new bucket’s lynchpin holes.
- Slide the pins into place: Slide the rear lynchpin into place. Be careful to avoid placing your fingers in the lynchpin holes.
- Lift the new bucket: Carefully lift the bucket into the air once you have the rear lynchpin inserted. The rear lynchpin should snap into place.
- Retract the ram: Retract the excavator’s ram to insert the front lynchpin.
- Move the bucket: Move the dipper around, rotating the bucket to ensure the bucket is secure and has a full range of motion.
How to Remove Excavator Bucket Teeth
Like buckets, bucket teeth also wear down over time. Periodically replacing bucket teeth is crucial to avoid damaging their adapters. Learn how to replace teeth on an excavator bucket in a few easy steps below.
1. Select a Suitable Bucket Tooth Type
The first step is identifying excavator bucket teeth that are appropriate. Each bucket tooth type has a purpose suited to particular excavation jobs. The different teeth varieties include the following:
- Chisel tooth: A chisel tooth is an earthmoving tooth with a high stacking surface. These teeth allow you to expertly excavate large quantities of soil, sand and gravel.
- Tiger tooth: Tiger teeth come in single or “twin” teeth. Both a single and twin tiger tooth can easily penetrate frost, rock and hard soil during digging and trenching projects. However, a twin tiger tooth has a longer shelf life due to its additional penetration surface.
- Rock tooth: A rock tooth is a steel chisel tooth that penetrates and moves rock, iron ore, stone or hard ground.
2. Identify the Correct Pin Installation Style
Next, identify your excavator’s bucket tooth-pin installation style and gather your tools or removal device kit. There are two primary pin installation styles for excavators:
- Top pin: A top pin installation style refers to an excavator bucket with a vertical or top-to-bottom tooth pin.
- Side pin: A side pin installation style features a horizontal or left-to-right pin and requires a longer tool to disassemble.
3. Locate Your Factory Bucket Tooth Size
Choosing the correct bucket tooth size is crucial. You can identify the style and size of your factory bucket teeth by locating the part number on the tooth’s surface, interior wall or pocket edge. You can also measure the pin, retainer or tooth pocket size to identify tooth size.
4. Replace the Teeth on Your Excavator Bucket
Once you have the correct tooth size and your assembly toolkit ready to go, follow these steps to replace your excavator’s teeth:
- Stabilize the excavator bucket on a flat surface.
- Knock out the existing roll or keener pins with a pin removal device.
- Use a brush to remove debris or stains from the excavator’s shank adapter.
- Place the new tooth over the bucket’s adapter.
- Hammer the new roll pin into the adapter’s pinhole opening until it is secure.
How to Change Buckets on a Mini Excavator
Mini excavators are compatible with several bucket styles, making them suitable for various projects across multiple industries, including construction, farming, landscaping and maintenance. If you are familiar with changing excavator buckets, you will be pleased to know changing the bucket on a mini excavator is a similar process, regardless of the bucket type:
- Remove bucket safety pins: First, set your bucket next to the new bucket on a level surface. Lift the retainer ring and slide it out to remove the safety pin from your bucket.
- Detach the bucket from the excavator: Once you have removed the safety pin, lift the boom arm away from the bucket to loosen the lynchpin. Remove the lynchpin to detach the bucket from the excavator.
- Align the dipper with the bucket: Reduce your excavator’s throttle speed and align the dipper links above the new bucket’s ears.
- Pick up your new bucket: Slowly pick up the new bucket and maneuver it so that the pinholes align.
- Replace the lynchpin: Slide the new lynchpin into place after aligning the bucket’s pinholes. Once the lynchpin is in place, secure it with the safety pin.